PRINTING MACHINE PARAMETERS
KOMORI Lithrone S40
- printing sheet size up to 1030 x 720 mm,
- printing of paper material in thickness of 0,06–0,8 mm,
- printing speed up to 15,000 sheets per hour,
- fifth tower coating directly during printing,
PAPER WEIGHT: 60 g/m2 – 600 g/m2
FORMAT/SIZTE: >1030 x 720 mm
COLOURS: CMYK + 1
PARTIAL + FULL PRINT VARNISH OPTION, BOTH GLOSS AND MATT
PRINTING MACHINE PARAMETERS
Somaflex 120
Printing is done from roll to roll.
Maximum roll diameter: 1,000 mm
Maximum roll width: 1,200 mm
Maximum print width: 1,200 mm
Printed material weight: 60–350 g/m2
Print length (report): 320–1,100 mm
Gap between the beginning and end of the glued plate: 5 mm
In the case of a requirement for endless printing, an engraved sleeve must be produced.
Number of cuts in standard production (exercise books): 3 of which 2 trims (waste)
Number of colour plates: 6
Printing method:
6 colours from the top side of the material
5 colours + varnish on the top side of the material
FOLDING MACHINE PARAMETERS
MBO Binder K 760/4 KL
Format limits: max. 660 x 1020 mm
Material limits: max. 200 g/m2,
min. 60 g/m2
Performance parameters: 8,800 pcs/h
Added value: loader, unloader
HEIDELBERG STAHLFOLDER KH 78/82
Format limits: max. 820 x 1280 mm
min. 140 x 180 mm
Material limits: max. 200 g/m2,
min. 60 g/m2
Performance parameters: 50,000 tactss/h
THREAD SEWING MACHINE PARAMETERS
Astronic 180
Format limits: max. 420 x 320 mm,
min. 150 x 75 mm
Material limits: max. 400 g/m2,
min. 250 g/m2
Performance parameters: 10,800 sheets/h
Aster EVO
Format limits: max. 420 x 320 mm,
min. 150 x 75 mm
Material limits: max. 200 g/m2,
min. 60 g/m2
Performance parameters: 10,800 sheets/h
PANEL DIVING MACHINE PARAMETERS
DA260
Format limits: max. 670 x 390 mm,
min. 205 x 140 mm
Material limits: cardboard 1,25–4 mm
Performance parameters: 700-1500 pcs/h according to the format
V8 LINE PARAMETERS
SIGLOCH - KOLBUS LINE
Format limits: max. 310 x 420 x 80 mm,
min. 105 x 105 x 6 mm
Material limits
cardboard: max. 3 mm,
min. 1,25 mm
Material limits
inner sheets: max. 250g/m2
min. 60g/m2
Performance parameters: 800 books/h
Added value: three-cutter, packer, conveyor
V2/V4 LINE PARAMETERS
Horizon Cabs System 4000
Format limits: max. 330 x 250 x 45 mm,
min. 148 x 105 x 1 mm
Material limits
cover: max. 300g/m2
min. 80g/m2
Material limits
inner sheets: max. 170g/m2
min. 60g/m2
Performance parameters: 4,000 books/h
Added value: three-cutter, conveyor
V1 LINE PARAMETERS
Helidelberg ST 300
Format limits: max. 320 x 420 mm,
min. 92 x 128 mm
Material limits: max. 250 g/m2,
min. 70 g/m2
Performance parameters: 1,500 ex. books/h
PACKAGING MACHINE PARAMETERS
LS 600CS line automated packaging machine
- welding bar size: 640 x 510 mm
- max. height of a packaged product: 200 mm
- real performance: 3 000 pcs/h
- foil type Polyolefin up to 30 µm,
PE 15 – 60 µm
- max. foil roll width: 600 mm
CUTTING MACHINES PARAMETERS
MS 115 E
working width: 1,150 mm
cut depth: min. 95 mm
max. 1,140 mm
stroke height: 110 mm
load height: max. 100 mm
SEYPA 115-4
working width: 1,150 mm
cut depth: min. 90 mm
max. 1,140 mm
stroke height: 140 mm
load height: max. 120 mm
SEYPA 132 PMC
working width: 1,320 mm
cut depth: min. 20 mm
max. 1,320 mm
stroke height: 145 mm
load height: max. 140 mm
POLAR 145 UC
working width: 1,450 mm
cut depth: min. 30 mm
max. 1,480 mm
stroke height: 150 mm
load height: cardboard 140 mm
paper 130 mm
LAMINATING MACHINE PARAMETERS
Sagitta
max. sheet size: 760 × 1020 mm
min. sheet size: 300 × 240 mm
sheet weight: 115–350 g/m2
laminating film thickness: 45 μm
shift capacity: 2,160 sheets/h
DIE-CUTTING MACHINE PARAMETERS
FY 43 Ub/2
max. book size: height 430 mm
width 300 mm
thickness of cut sheet block (1 sec) 8 mm
Shift performace in pcs:
A4 die-cutting, 100 sheets 400
A5 die-cutting, 100 sheets 500
A6 die-cutting, 100 sheets 520
A4 150 die-cutting, 180 sheets 350
A5 150 die-cutting, 180 sheets 450
A5 telephone. record. die-cutting 500
A6 telephone. record. die-cutting 520
GILDING MACHINE PARAMETERS
OPUS Masterpress EMD
Hot stamping (book binding) machine with an electric drive and electronic control.
The device is used for intaglio printing and hot gilding with coloured gilding foils using plates and texts stacked
from letters, cutting out with shaped knives, embossing with stencils.
Working area (mm): 308 x 218
Temperature control range (°C): 30–190 Shift performance: depends on the size of the plate, the type of embossing or die-cutting and the materials used.
